The TKCBS2 series current sensor is a open loop device based on the measuring principle of the hall effect, with a galvanic isolation between primary and secondary circuit. It provides accurate electronic measurement of DC, AC or pulsed currents.
电参数 Electrical data
|
型号 Type 参数 Parameter |
TKC |
TKC |
TKC |
TKC |
TKC |
TKC |
TKC |
TKC |
单位 |
|
额定输入电流 |
±50 |
±75 |
±100 |
±150 |
±200 |
±300 |
±400 |
±600 |
A |
|
测量电流范围 |
±150 |
±225 |
±300 |
±450 |
±600 |
±900 |
±900 |
±900 |
A |
|
额定输出电压 |
±4±1% |
V |
|||||||
|
电源电压 |
±15±5% |
V |
|||||||
|
失调电压 |
±25 |
mV |
|||||||
|
功耗电流 |
≤25 |
mA |
|||||||
|
磁失调电压 |
±30 |
±25 |
mV |
||||||
|
失调电压温漂 |
≤±1.5 |
≤±1.0 |
mV/℃ |
||||||
|
输出电压温漂 |
≤±1.5 |
≤±1.0 |
mV/℃ |
||||||
|
线性度 |
≤1 |
%FS |
|||||||
|
响应时间 |
≤3 |
μS |
|||||||
|
带宽 |
@DC,(-3dB) 25 |
KHz |
|||||||
|
绝缘电压 |
@ 50HZ，AC，1min 2.5 |
KV |
|||||||
应用 Applications
● 交流变速驱动器
AC variable speed drives
● 直流电机驱动静态转换器
Static converters for DC motor drives
● 变频调速系统
Variable speed drives
● 电焊机
Power supplies for welding applications
● 通讯电源
Battery supplied applications
● 不间断电源UPS
Uninterruptible Power Supplies (UPS)
● 开关电源
Switched Mode Power Supplies(SMPS)
结构参数 Mechanical dimension(for reference only)
Remarks：
1. All dimensions are in mm.
2. General tolerance ±1mm.
使用说明 Directions for use
1. 当待测电流从传感器穿过，即可在输出端测得电压大小。(注意：错误的接线可能导致传感器损坏)
When the current will be measured goes through a sensor ,the voltage will be measured at the output end。
(Note: The false wiring may result in the damage of the sensor).
2. 可按用户需求定制不同额定输入电流和输出电压的传感器。
Custom design in the different rated input current and the output voltage are available.
执行标准 Standards
● UL94-V0.
● EN60947-1:2004
● IEC60950-1:2001
● EN50178:1998
● SJ 20790-2000
总体参数 General date
|
|
数值 Value |
单位 Unit |
符号 Symbol |
|
工作温度 Operating temperature |
-40 to +85 |
ºC |
TA |
|
储存温度 Storage temperature |
-40 to +125 |
ºC |
TS |
|
毛重(约) Mass(approx) |
BS2:65 |
g |
M |
特性图 Characteristics chart
